Destiny RX-10F 2.0カーボンシャーシキット [DRX-00008]

販売価格: 52,580円(税込)


New middle motor platform design, motor mount and solid layshaft bulkhead.
New two pieces of 40g chassis balancing weight and new front foam bumper.
New graphite front and rear chassis braces.
New design single piece 7075 aluminum floating servo mount.
New clamp design single bell-crank steering system and install with two pieces of 5x9x3mm large ball bearing for improved reliability. 4 different Ackermann angle selectable.
New 2.25mm USA high grade graphite materials for narrow design main chassis, 2.0mm multi-flex design upper deck and 3.0mm front and rear lower shock towers.
New high quality hard coated short dampers with POM pistons and 20mm damper springs.
New design front and rear 7075 aluminum upper bulkhead and linkage mount. It makes fine adjustment on roll center.
New 7075 aluminum rear bulkheads.
New 7075 aluminum battery brackets.
Front spring steel double CVD included as makes smoother in corner.

7075 aluminum front and rear suspension mounts. Three different size of suspension mounts to makes wider range adjustment on track width from 40.7-49.5mm.
Plastic eccentric bushing for suspension. Fine adjustment on toe-in and toe-out angle in 0.3 degree per step.
New design high grade composite front and rear lower suspension arms, steering knuckles, c-hubs and rear hubs plastic parts.
7075 aluminum front lower bulkheads.
Transmission ratio 38T/20T in ratio 1.9.
2/4/6 deg caster insert is selectable to assembly to c-hub. Large open on c-hub for easy install or remove front CVD.
In-line design on steering knuckle. Re-position ball bearings and CVD joint CENTER. Maximum decrease the noise and wheel vibration. Maximum increase steering efficient and cornering speed.
7075 aluminum wheel adaptors. Lightweight and reliable on drivetrain.
Full set low friction coating aluminum damper balls and ball studs.
High precision 4 gears differential with 7075 aluminum weight reduced gear drive cups.
7075 aluminum steering and upper link turnbuckles. Black color anodized.
Bearing supporting front and rear anti-roll bar system.
64P 102T high quality spur gear.
Full set high grade ball bearings.